You can waterproof your shower without the hassle of removing tiles following these simple steps:

1.      Remove any silicone sealant strips and soap build-up. Clean mould off grout tiles.

2.      Use a sealant you can purchase from your local hardware store. Test the sealant in a small area first to test for discolouration.

3.      Starting from the top of the wall, brush the sealant down the tiles and grout. Finish with the base of the shower.

4.      Allow at least 15 minutes for the first application to dry, and then repeat another application.

5.      Allow at least 15 minutes for the second application to dry, and then wipe down the shower with a dry cloth.

6.      Allow the sealant to dry for 24 hours before using the shower.

To find out more contact Scott at FXD Plumbing Sydney Inner West or Call Now on 0428 795 498.