Everyone, at least once, has called a plumber in the Inner West to deal with their plumbing problems at home. One of the most common and annoying issues homeowners have to experience is a drop in their water pressure. Some times this could occur as Sydney water are working on the water mains but quite often it’s caused by something within your property’s water service.
While other plumbing issues such as blocked drains in Annandale are significantly messier and more stressful, low water pressure is equally frustrating. To maintain comfort and productivity, the average home water pressure should have about 210 kilopascals. This number is ideal to keep up with the 300 litres of water daily consumption of a typical Australian citizen. We often neglect our water supply until we experience low pressure. When this happens, most of us don’t know what to do, how to fix it and, and who to call if deemed necessary. So to help you, here’s what you need to know and how to deal with low water pressure.
1. Your Water Supplier Has Malfunctioning Issues
Before checking your water system and pipes, ask your neighbours around you. If they are experiencing similar issues, chances are the low water pressure is not connected with your house’s water system. Your water supplier might be carrying out repairs to the mains, so it’s best to contact them for confirmation and rectification.
2. The Water Meter Or The Main House Valve Is Partially Shut
Low water pressure could be caused by one or more valves that are not fully opened. Since they control the water intake and distribution to your house, when partially shut, they can restrict the water that flows into your bathroom, kitchen, laundry and garden. This is why it’s important to know where these valves are located so you can have a quick check. Typically, they are installed at ta front corner of your property or close to taps and other water outlets.
When you find it, try fully turning it open. If there’s no improvement, there might be a faulty valve and fixing it requires an expert plumber in Inner West.
3. Mineral Build Up
It’s natural for water to go through the pipes carrying debris and minerals. Over time, this results in the build-up that reduces the diameter of the pipes which can cause lower water pressure. Check all tap outlets for mineral build-up, if they are clean, then mineral build up could be lodged somewhere else within your properties water service and requires an experienced plumber.
4. Corroded Pipes
While there are innovative solutions for more durable pipes, they are still not fail-safe. For instance, despite the capacity of galvanised pipes to last up to 20 years, sooner or later, they will also deteriorate because of harsh conditions. When this happens, it won’t be an easy fix and will require a qualified plumber to repair or replace the damaged pipes.
Knowing what to do with plumbing issues can provide an initial solution to your current problem. However, when it calls for a professional fix, it’s best to contact a fully qualified and licensed plumber like FXD Plumbing.
